[TRNSYS-users] TRNSBuild active layer

[David BRADLEY]

Mukhtar

  You'll need to send the project and building file (as well as any 
other files needed to run the simulation) to your distributor so that 
they can have a look. If you aren't sure who to contact, please let me 
know and I will point you in the appropriate direction.

kind regards,

  David


On 08/31/2022 06:30, Mukhtar Abeid via TRNSYS-users wrote:
> Hi guys
>
> I found a problem in active layer modelling, where the results show no 
> heating response by airnode temperature even when the heating power is 
> over sized. The outlet temperature of the active layers doesn’t 
> change!!. Moreover, the ground temperature model is constant at zero 
> Centigrade!
>
> Thank you
>
> Mukhtar
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220902/5fe3a4ed/attachment.htm>