[TRNSYS-users] How to use Matlab with TRNSYS

[David BRADLEY]

Christopher,

  There is an example of using Trnsys and Matlab in the standard Trnsys 
package. You can also look at the information in the Type155 section of 
the 04-MathematicalDescription.pdf manual for some hints on how to get 
the two programs to communicate with each other. The main point will be 
to know which version of Matlab you are using and to get the version of 
Type155 that corresponds to your Matlab version. There are a number of 
versions of Type155 stored in the .\TrnsysXX\Exe\DLLs\ directory. If you 
are not able to find your version of Matlab in there then you can 
contact your distributor and they can get you other versions.

kind regards,

  David


On 10/09/2022 12:15, christopher sathiya via TRNSYS-users wrote:
> *Dear Alastair McDowell,*
> *Greeting!!!*
> *
> *
> *In TRNSYS, how can I integrate Matlab with TRNSYS? Please provide the 
> procedure in detail*
> *
> *
> *
> *
> *With regards,*
> *S, Christopher*
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20221010/ddabe743/attachment.htm>