[TRNSYS-users] Ansys and trnsys

[Michaël Kummert]

Hello,

 

I would think that if a solution was working in TRNSYS 17, it should still work in TRNSYS 18. But I am not aware of such a solution.

 

As a possible workaround, you could use the TRNSYS components calling Matlab or Python, and from there call ANSYS. A similar workflow is possible with COMSOL (TRNSYS -> Matlab -> Comsol), at least in theory. 

Perhaps some users have tried them and can comment. I have no experience with these combinations myself.

 

Michaël Kummert

Polytechnique Montréal

 

 

 

 

From: adnan rasheed via TRNSYS-users <trnsys-users at lists.onebuilding.org> 
Sent: March 17, 2022 10:59
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: adnan rasheed <adnan.upm.spain at gmail.com>
Subject: Re: [TRNSYS-users] Ansys and trnsys

 

I think you can call ansys by using Trnsys 17. As per my knowledge in Transys 18 its not possible.

 

On Thu, Mar 17, 2022 at 11:54 PM Jen parken via TRNSYS-users <trnsys-users at lists.onebuilding.org <mailto:trnsys-users at lists.onebuilding.org> > wrote:

Hello everyone 

is there a way to connect TRNSUS TO ANSYS ? for transient analysis?

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org <mailto:TRNSYS-users at lists.onebuilding.org> 
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 

Adnan Rasheed

Post-doc Research Fellow

Kyungpook National University

Daegu, South Korea.

+82-102762-0105

 <mailto:adnan.upm.spain at gmail.com> adnan.upm.spain at gmail.com,  <mailto:adnanrasheed at knu.ac.kr> adnanrasheed at knu.ac.kr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220317/ba49e08f/attachment.htm>