[TRNSYS-users] [Urgent] Error during TRNSYS simulation

[David BRADLEY]

Maja,

   Reimporting an input file into the Simulation Studio has always been 
a bit dangerous; not all of the information about your project is stored 
in the input file (a *.dck) and more importantly, there are some things 
that you can do with *.dck syntax that are very hard for the Studio to 
interpret. It is best to make all your modifications to your project 
using the Studio and not try to edit the input file and then reimport 
the *.dck. Perhaps if you can give some more information about why you 
need to reimport the *.dck I might be able to suggest a workaround. It 
would also help to know which version of Trnsys you are using because 
the dck import function has evolved significantly over the years.

kind regards,

  David


On 06/24/2022 06:52, Maja Danovska via TRNSYS-users wrote:
> Dear Users,
>
> I am facing a problem with a TRNSYS simulation (basically a BUI file 
> with the building's features and a .tpf file where I implemented other 
> components, e.g., CO2 balance, ventilation system and so on). I 
> realised that when I run the simulation directly by opening the .tpf 
> file, the simulation works. However, when I open /simulation//studio/ 
> and import the TRNSYS Input file, and run the simulation, an error 
> occurs in an Equation tool.
>
> I tried the same with many folders, but the same happens with every 
> simulation.
>
> I cannot figure it out why and, if maybe this is "normal"...
>
>
> Best Regards,
>
>
> --
> *Maja Danovska*
> *
> *
> Research Fellow
> Dep. of Civil, Environmental and Mechanical Engineering
> University of Trento
> via Mesiano, 77 - 38123 - Trento - ITALY
>
> maja.danovska at unitn.it
> +393403391289
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220627/94572bb2/attachment.htm>