[TRNSYS-users] Type 177 dll error

[David BRADLEY]

Victoria,

  I don't have any experience with Dr Albers model. However, if the 
model is compiled as a 32-bit dll and you are using Trnsys18 in its 
native (64-bit format) that would explain the error. Likewise if Dr. 
Alber's model is compiled as a 64-bit dll and you are using a 32-bit 
Trnsys (v17 or the 32-bit version of v18) then you would again expect 
such an error. All of the pieces have to be compiled the same.

kind regards,

  David




On 01/17/2022 16:18, Victoria Sarai Amador Barraza via TRNSYS-users wrote:
> Hello everyone,
>
> I am trying to use the type 177, wich  simulates single staged 
> H2O/LiBr-absorption chillers. This type was developed by Dr.-Ing Jan 
> Albers at the Institut für Energietechnik. Downloaded from: 
> http://www.eta.tu-berlin.de/menue/mitarbeiter_innen/wimi/albers/
>
> The thing is that whenever I try to run a simulation, an error occurs. 
> A message appears indicating that the dll has not been found in the 
> UserLib. I have already copied the dll to the respective directories 
> but this error still shows.
>
> Has anyone worked with this type before? How can I run a simulation 
> with it?
>
> Thanks,
> Victoria
>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220118/99d6d5e6/attachment.htm>