[TRNSYS-users] help: tracing over drawing

[Aly Osman]

Dear All,

I asked earlier about importing dwg to sketchup for trnsys3d and I received
a reply that I should trace over the lines in my zones.
My question is since my walls are drawn in full width, where should I start
tracing (from the outer side or the inner side or from the middle of the
wall?
[image: image.png]
-- 
Kind regards,

Mr. Aly Osman
MSc. Mechanical Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20221212/44362a99/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 124356 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20221212/44362a99/attachment-0001.png>