[TRNSYS-users] trnsys :end of file encountered

[David BRADLEY]

Pu,

   It may be that the weather file is empty. Unfortunately when you run 
a simulation and the weather file that you have specified doesn't exist 
you get an error but a blank file is also created. The next time you run 
the simulation the weather file is found but can't be read correctly and 
so you can get this error. Check the weather file at the location you 
have specified and make sure that it is not 0kB in size.

   As a side note, if Type15 is reading a correct weather file and it 
gets to the end of the file it will just rewind the file back to the 
beginning and keep reading.

kind regards,

  David


On 09/14/2021 22:43, Huijie Pu via TRNSYS-users wrote:
> Hello,
> I encountered an error in the simulation: end of file Encountered. It 
> shows that there is an error in the weather file, I use type15-2, so I 
> switch to another Type 15-6, the same error still occurs.I think the 
> setup in Type15-6 is correct, how to solve this problem?
> Pu
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210915/1a4c2f14/attachment.htm>