[TRNSYS-users] Information request

[David BRADLEY]

Badr,

   Sorry for the delay in getting back to you. The PV/T collectors in 
Trnsys can be used for either water or air. They don't internally 
compute the relative humidity of the air leaving the PV/T but if you put 
a Type33 (psychrometrics) at the outlet of the PV/T and give it the 
outlet temperature but the the absolute humidity ratio of air entering 
the PV/T then it will get you the RH of the air leaving the PV/T

kind regards,

  David


On 09/29/2021 05:59, Badr OUHAMMOU via TRNSYS-users wrote:
> does Trnsys has a component for  solar PVT air collector ?
>
> -- 
>
> /Badr Ouhammou
> /
>
> /Renewable Energy and Environment Laboratory/
>
> /Ibn Tofail University
> /
>
> /Faculty of Sciences
> /
>
> /BP. 133, 14 000 Kenitra-Morocco
> /
> /baouhammou at yahoo.com <mailto:baouhammou at yahoo.com>
> /
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211001/898a883e/attachment.html>