[TRNSYS-users] Time & Timestep

[David BRADLEY]

Pablo,

  I would recommend that you contact your distributor and send them your 
code; the may be able to spot the problem. If you aren't sure who to 
contact, please send me a message directly and I will help point you in 
the right direction.

kind regards,

  David


On 11/26/2021 09:45, Pablo Calleja Cayón via TRNSYS-users wrote:
> Hello everyone,
>
> I'm a beginner using Trnsys and I wanted to develop a new type from 
> scratch in order to further develop more complex type. Two values 
> would be introduced as an input and one value would be the output (Sum 
> of both values).
>
> I have battled with this simple new type for more than a week, but I 
> still can't figure out why my output is still Zero and, last but not 
> least, why I get all my time steps in the order of magnitude E+15.
> I have used this Type at the Begin file from the example folder: 
> Outlet fluid temperature from Type138 as input value 1 and Outlet 
> temperature from Type1b as input value 2.
>
> Any suggestions about how to create this Type in order to make ir 
> work? Is there any rule at the time of using an specific folder for 
> each step of the process?.
>
> Thank you in advance for the support this community offers to the 
> novels in this platform.
>
> Kind regards,
>
> Pablo Calleja
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211129/ccf3e83e/attachment.htm>