[TRNSYS-users] Import IFC files to Trnsys sketchup

[miriam di matteo]

Hi Yorgos,
(Trnsys v.17)
some month ago i tried to import a Revit model in SketchUp, I presume in
IFC extension. Honestly after some attempt i let it go.
But i remember one thing that might be useful to you:
I had this problem: I could not move surfaces from one thermal zone to
another or from the Skp space within the thermal zone.
I solved it like this: I first created my own thermal zone, activated it,
then imported 3D directly into the thermal zone (the surfaces are
recognized as wall, floor etc. without problem).

It was (is) the first time that i used Trnsys, so there may be better
solutions, or you may not have the same my problems.
I hope i have been useful.
Good work
Miriam

Il giorno gio 27 mag 2021 alle ore 14:42 Yorgos Polymenopoulos via
TRNSYS-users <trnsys-users at lists.onebuilding.org> ha scritto:

> Dear all
>
>
>
> Can you please inform me if it is possible to import IFC BIM files to
> Trnsys Sketchup? If yes, can you also guide me on how to do it?
>
>
>
> Best regards
>
> Yorgos Polymenopoulos
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210528/571e03ec/attachment.htm>