[TRNSYS-users] Generating three times more cooling power than necessary, the cooling set temperature doesn't drop

[Arian Bahrami]

Hi,
I am not sure what you developed since it seems you don't understand the basics. The set points of the cooling are the temperatures that the zone Temp should be higher than those set points so the systems starts working. You got your required temperature as you set. How do you expect to see less temperature while it is working? 

Arian

Sent from Yahoo Mail for iPhone


On Monday, May 31, 2021, 11:49 AM, RUBIO RUBIO, JOSÉ JAVIER via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:

 <!--#yiv8744625079 _filtered {} _filtered {}#yiv8744625079 #yiv8744625079 p.yiv8744625079MsoNormal, #yiv8744625079 li.yiv8744625079MsoNormal, #yiv8744625079 div.yiv8744625079MsoNormal {margin:0cm;font-size:11.0pt;font-family:"Calibri", sans-serif;}#yiv8744625079 .yiv8744625079MsoChpDefault {font-family:"Calibri", sans-serif;} _filtered {}#yiv8744625079 div.yiv8744625079WordSection1 {}-->
To whom it may help,
 
  
 
I have developed a cooling system with cooling coils to produce the cooling power that is needed for the zones of my warehouse. Those cooling coils produce three times more cooling power than the different zones of my warehouse need. There are four zones which different set temperature: three of them with 4 Celsius degrees and the other one with 8 Celsius degrees. Despite the fact I generate three times more cooling power than they need, why the air temperature of the zones do not drop below their set temperature?
 
  
 
Thanks in advance,
 
  
 
Regards,
 
  
 
José Javier Rubio Rubio.
 
  
 _______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210531/0c488590/attachment.html>