[TRNSYS-users] Regarding the use of Type 2: aquastatC controller

[asmin aryal]

Dear Sir,
I am cooling type 56 building with type  type 752 (Simple Cooling Coil
Using Bypass Fraction Approach; Temperature Controlled) by introducing the
cool air via ventilation to type 56.
 I am controlling the room air temperature by type 2: aquastatC controller.
When i run the simulation with 5 min time step, the controller cannot
control the room air temperature within the dead band but when i run the
simulation with 1 min time step it can control the room temperature within
the dead band.
What may be the possible reason.
Looking forward to your answer.
[image: image.png]

[image: image.png]
Sincerely
Ashmin Aryal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210525/3eb1b827/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 816505 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210525/3eb1b827/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 320282 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210525/3eb1b827/attachment-0003.png>