[TRNSYS-users] How to solve Error 308?

[David BRADLEY]

Gokula,

   The only two ways of avoiding that error are to delete printers or to 
recompile the Trnsys dll with increased limits. If you are using v18 
then please contact your distributor and then can get you a modified 
dll. If you are using an earlier version then unfortunately you'll need 
to either recompile the dll yourself or keep the number of printers to a 
minimum

kind regards,

  David



On 07/19/2021 21:15, SENTHIL KUMAR, gokula [Student] via TRNSYS-users wrote:
> Dear TRNSYS Users,
>
> Recently I am getting ERROR 308. It shows that the maximum number of 
> input descriptions has been exceeded in the input file. Presently I am 
> deleting a few printers component to tackle this and run the 
> simulation file. However, I do not think that this is the right way to 
> do it. Please inform me a solution for it.
>
> Thanking you,
> Gokula Manikandan Senthil Kumar
> The Hong Kong Polytechnic University
>
>
> /Disclaimer:/
>
> /This message (including any attachments) contains confidential 
> information intended for a specific individual and purpose. If you are 
> not the intended recipient, you should delete this message and notify 
> the sender and The Hong Kong Polytechnic University (the University) 
> immediately. Any disclosure, copying, or distribution of this message, 
> or the taking of any action based on it, is strictly prohibited and 
> may be unlawful./
>
> /The University specifically denies any responsibility for the 
> accuracy or quality of information obtained through University E-mail 
> Facilities. Any views and opinions expressed are only those of the 
> author(s) and do not necessarily represent those of the University and 
> the University accepts no liability whatsoever for any losses or 
> damages incurred or caused to any party as a result of the use of such 
> information./
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210720/3be8fccd/attachment.htm>