[TRNSYS-users] Type 534

[David BRADLEY]

Maryam,

   If you connect the output of one component to the input of another 
the input will always have the value of that output. If the value of the 
output changes with time then so will the value of the input. If you are 
getting an error you can look at the *.lst file that is generated by the 
simulation and interpret the message to solve it. If you run into 
trouble and are using Trnsys18 then you should contact your 
distributor's hotline for assistance. If you aren't sure who to contact, 
please send me a direct email and I can help you find the appropriate 
hotline.

kind regards,

  David


On 07/04/2021 00:42, Maryam Khademi via TRNSYS-users wrote:
>
> Hello everyone,
>
> I have a problem with type 534 in the simulation. For example I have a 
> storage tank (type 534) with two ports and 4 nodes. I connected a data 
> reader to read temperature for port 1. But when I plot the temperature 
> of port 1 it is different with the input temperature data. What is the 
> reason of this noncompliance?
>
> Thank you in advance for your help.
>
> Best Regards,
>
> Maryam
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for 
> Windows 10
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210706/5a9fbb34/attachment.htm>