[TRNSYS-users] error with dll found but is not loading the type on Virtual Machine Win10

[David BRADLEY]

Xavier,

   I think the first thing to check is to make sure that the dlls 
containing Types832 and 6139 are in the appropriate subdirectory of 
.\TrnsysXX\UserLib. The other thing that occurs to me is that there may 
be a mismatch between 64- and 32- bit versions. If those Types are 
compiled as 32-bit dlls they will not be found by the 64-bit Trnsys18 
even if the files are in the correct location.

  I apologize if these suggestions are very basic!

kind regards,

  David


On 01/21/2021 10:13, Jobard Xavier via TRNSYS-users wrote:
>
> Dear TRNSYS user,
>
> I am trying to run a Trnsys deck with non-standard types (Type 832 and 
> Type 6139)  on a virtual machine (win10).
>
> A simple example (SDHW.dck) works fine. However my deck with type832 
> and type6139 which works fine on my laptop throws the errors but are 
> actually listed as found further up the log file :
>
> *** Fatal Error at time   :         0.000000
>
>     Generated by Unit     : Not applicable or not available
>
>     Generated by Type     :   832
>
>     TRNSYS Message 105 : A TYPE was called in the TRNSYS input file 
> but was either not linked into trndll.dll or was not found in an 
> external dll. A dummy subroutine was called in its place. Please link 
> the TYPE or remove it from the input file
>
>     Reported information  :  Type832 could not be located in either 
> the trndll.dll or in an external dll. Please relink theTRNDll.dll 
> including this Type or make sure that an external DLL in the 
> \UserLib\DebugDLLs and \UserLib\ReleaseDLLs folders contain the Type.
>
> *** Fatal Error at time   :         0.000000
>
>     Generated by Unit     : Not applicable or not available
>
>     Generated by Type     :  6139
>
>     TRNSYS Message 105 : A TYPE was called in the TRNSYS input file 
> but was either not linked into trndll.dll or was not found in an 
> external dll. A dummy subroutine was called in its place. Please link 
> the TYPE or remove it from the input file
>
>     Reported information  :  Type6139 could not be located in either 
> the trndll.dll or in an external dll. Please relink theTRNDll.dll 
> including this Type or make sure that an external DLL in the 
> \UserLib\DebugDLLs and \UserLib\ReleaseDLLs folders contain the Type.
>
> These 2 types are distributed by research institutes and were not 
> recompiled in any way. Type 832 was used on several machines without 
> problem before.
>
> Can somebody help ?
>
> http://correspondance.heig-vd.ch/assets/heig.png
>
> 	
>
> Xavier Jobard
> Ing. INSA Strasbourg
>
> Collaborateur Ra&D
>
> Institut de Génie Thermique (IGT)
> Laboratoire d’énergétique solaire et de physique du bâtiment (LESBAT)
>
> Prof. :
>
> 	
>
> +41 24 557 28 17
>
> Site web :
>
> 	
>
> http://www.lesbat.ch
>
>
> 	
>
> xavier.jobard at heig-vd.ch <mailto:xavier.jobard at heig-vd.ch>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210122/7e452d06/attachment.htm>