[TRNSYS-users] Problem matching surfaces Trnsys3d

[Toni Calabrese]

Hi,
I have a problem with the "match surfaces" function in SketchUp. I have a building in which the second floor is smaller compared to the first floor (see the image). When I "match the surfaces", it tells me that the floor of the second floor is an external roof and seems that it does not recognize that the floor of the second floor is connected with the ceiling of the first floor. If the two floors have the same surfaces, it works perfectly but in this special case it does not work. Someone can help me?
Thanks a lot for any help.


[cid:image003.png at 01D6E2AD.ACBDD570]
________________________________
Toni Calabrese, MSc.
Wissenschaftlicher Projektmitarbeiter
toni.calabrese at spf.ch<mailto:toni.calabrese at spf.ch> | toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>

T +41 58 257 4827

SPF Institut für Solartechnik
OST - Ostschweizer Fachhochschule
Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch<http://www.spf.ch> | www.ost.ch<http://www.ost.ch>

OST - Ostschweizer Fachhochschule ist der Zusammenschluss aus FHS St.Gallen, HSR Rapperswil und NTB Buchs.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210104/64f6ff47/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 87747 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210104/64f6ff47/attachment-0001.png>