[TRNSYS-users] heating demand

[David BRADLEY]

Adnan,

  There could also be gains/losses from ventilation, infiltration, 
occupants, internal gains etc. I would recommend that you activate some 
of the balance outputs on the zone. That will create an output file that 
shows all the major energy flows into and out of the zone.

kind regards,

  David


On 02/09/2021 02:35, adnan rasheed via TRNSYS-users wrote:
> Hello all,
> i am using Qheat to calculate total heat demand of a room which is less than the heat loss from all sides, floor and roof calculated by Qcomo.
> thanks
>
> -- 
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210209/c525b56f/attachment.htm>