[TRNSYS-users] Import EnergyPlus idf file

[David BRADLEY]

Yu-Wei,

  As far as I know, there is no way to import an EnergyPlus *.idf into 
TRNBuild. The legacy OpenStudio plugin to SketchUp used a very narrow 
portion of the *.idf file format and since Trnsys3d is built on the 
legacy OpenStudio plugin, we used the same for importing geometry and 
very basic default wall constructions into TRNBuild.

kind regards,

  David



On 10/24/2020 17:01, Yu-Wei Hung via TRNSYS-users wrote:
> Hello all,
>
> I'm a user of TRNSYS 17. I'd like to know if there is a way to import 
> the EnergyPlus idf file to TRNBuild. I tried to import idf (v7.2) by 
> the function in TRNBuild "file -> import TRNSYS3d file...". However, 
> the TRNBuild cannot import the file properly. Nothing showed up after 
> importing is done. I had tried to use TRNSYS building wizard and 
> TRNSYS3d to create a new idf for TRNBuild. But none of them worked.
>
> Is there a way to import EnergyPlus idf file to TRNBuild properly?
>
> Thank you for your help,
> Yu-Wei
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201024/51a099c2/attachment.htm>