[TRNSYS-users] TRNSYS time equation

adnan rasheed adnan.upm.spain at gmail.com
Thu Mar 26 01:30:33 PDT 2020


Dear Marion Hiller ,
 i checked Type 14 output will not work in this situation.
Actually i want to control natural ventilation window open and close
according to the set point, at the corresponding time span. As i write
before  temperature is room temperature, on behalf of that window should be
open and close. if room temperature is high than the set value at
particular time span window should open (natural ventilation).

00 to 5h.... temp set point 18 C
5-10h....  temperature set point 22  C
10-18h....23  C
18 -24h...24  C

Thanks

On Thu, Mar 26, 2020 at 4:58 PM Marion Hiller via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Hello Adnan,
>
>
>
> I recommend to use Type 14 instead of an equation .
>
>
>
> Marion
>
>
>
> Marion Hiller
>
> hiller at transsolar.com
>
>
>
> Transsolar SoftwareEngineering
>
> Stuttgart | Munich | Paris | New York
>
>
>
> Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany
>
> CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
>
> Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639
>
>
>
> *Von:* TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> *Im
> Auftrag von *adnan rasheed via TRNSYS-users
> *Gesendet:* Donnerstag, 26. März 2020 08:26
> *An:* TRNSYS users mailing list at OneBuilding.org <
> trnsys-users at lists.onebuilding.org>
> *Cc:* adnan rasheed <adnan.upm.spain at gmail.com>
> *Betreff:* [TRNSYS-users] TRNSYS time equation
>
>
>
>
> Hello everyone,
>
>
>
> i want to use an equation for two control parameters time and temperature
> . like my control is
>
>
>
> 00 to 5h.... temp set point 18 C
>
> 5-10h....  temperature set point 22  C
>
> 10-18h....23  C
>
> 18 -24h...24  C
>
>  i need to get output as 0 or 1,  i am already using the following
> equation which is only allowing me to set one temperature set point, i need
> to set different temperature set points during complete one day.
>
>
>
> GT(Temp,20)
>
>
>
> how i can add time function with this equation
>
>
>
> Thanks
>
>
>
> --
>
> Adnan Rasheed
>
> Post-doc Research Fellow
>
> Kyungpook National University
>
> Daegu, South Korea.
>
> +82-102762-0105
>
> adnan.upm.spain at gmail.com, adnanrasheed at knu.ac.kr
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>


-- 
Adnan Rasheed
Post-doc Research Fellow
Kyungpook National University
Daegu, South Korea.
+82-102762-0105
adnan.upm.spain at gmail.com, adnanrasheed at knu.ac.kr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/4a70a9f6/attachment.htm>


More information about the TRNSYS-users mailing list