[TRNSYS-users] Concentrating PV-Thermal type 50

David BRADLEY d.bradley at tess-inc.com
Tue Jul 28 05:07:48 PDT 2020


Janeet,

  Once you have made the modification to the proforma, save it, then 
right click on the component in your simulation and select "replace" 
from the context menu. Browse to the location of the modified proforma 
and click "ok"

  As to your other question, I am afraid that we are no longer 
supporting v16.

kind regards,

  David


On 07/27/2020 06:39, janeet anand wrote:
> Thank you for your prompt response David.
>
> Currently working on Trnsys 16. Please could you guide me on the way 
> to update the proforma? I tried updating the variable list and saving 
> the component  as per screenshot below.
> image.png
>
> However still not able to insert a value greater than 1 in the studio 
> environment. Is something to be done differently to the proforma?
>
> Have noticed 1 more thing with the model : At times of zero radiation 
> and pump working the thermal energy is negative? I am interpreting it 
> to be that at night times energy is lost from the fluid to the 
> surroundings. However the same is not the case of the pure thermal 
> collectors. Please could you explain this behavior?
>
> Thanks again.
>
> Regards,
> Janeet
>
>
> On Tue, Jul 28, 2020 at 2:21 AM David BRADLEY <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>> wrote:
>
>     Janeet,
>
>      Your first two questions are things that have been fixed in the
>     most recent version of TRNSYS. I am not sure when they were fixed
>     but I think they have been fixed for awhile. Which version of
>     Trnsys are you using? If it is an older version, you can fix them
>     by modifying the proformas yourself. The errors are in the
>     proformas and not in the code.
>
>      As for your third question, you'll need to send that to your
>     distributor. If you aren't sure who to contact, send me a direct
>     email and I will point you in the correct direction.
>
>     kind regards,
>
>      David
>
>
>     On 07/27/2020 06:58, janeet anand via TRNSYS-users wrote:
>>     Dear experts,
>>
>>     I am trying to simulate a parabolic trough concentrating
>>     collector using the type 50e-mode 8. Have included the defualt
>>     SOLCEL data file.
>>
>>     Had a few queries:
>>     1. Parameter 3 - ratio of aperture to absorber area - max
>>     allowable value is 1 whereas the concentration ratio of 55 is to
>>     be simulated. Please can you advise a solution to this.
>>     2. Input 4 - Incident radiation is required in KJ/hr or KJ/hr/m2?
>>     3. Input 7 - Voltage applied to array - anything above 2V gives
>>     unrealistic output.
>>
>>     Thank you for your time.
>>
>>     Regards,
>>     Janeet
>>
>>
>>     _______________________________________________
>>     TRNSYS-users mailing list
>>     TRNSYS-users at lists.onebuilding.org  <mailto:TRNSYS-users at lists.onebuilding.org>
>>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>     -- 
>     ***************************
>     David BRADLEY
>     Principal
>     Thermal Energy Systems Specialists, LLC
>     3 North Pinckney Street - suite 202
>     Madison, WI  53703 USA
>
>     P:+1.608.274.2577
>     F:+1.608.278.1475
>     d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
>
>     http://www.tess-inc.com
>     http://www.trnsys.com
>
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200728/17158fd4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 89287 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200728/17158fd4/attachment-0002.png>


More information about the TRNSYS-users mailing list