[TRNSYS-users] Change in cooling load with changing aspect ratio

[asmin aryal]

Dear all,
I have modeled a building in TRNSYS. I am cooling the building using the
radiant panel on the roof integrated with simple cooling coil and other
heat recovery devices (like enthalpy wheel, round around coil), for
representing the radiant room.

I wanted to see the change in cooling load with change in building aspect
ratio the aspect ratio of the building from 1:1 to 4:1.
The building with 1:1 aspect ratio is 20m * 20 m * 3m and the building with
4:1 aspect ratio is 40m *10m * 3m.  On doing so the cooling load of the
building increased by around 4%.
* In my opinion, the cooling load of the building with aspect ratio of 4:1
from 1:1 should increase more. Why is it just 4%?*
I have attached the model with 4:1 as ew4isto1.zip and 1:1 as EW 1isto1.zip.

*It would be great to get a comment about the way i have used the radiant
chilled ceiling.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200728/0a1a2f35/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EW 1isto1.zip
Type: application/x-zip-compressed
Size: 106180 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200728/0a1a2f35/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ew4isto1.zip
Type: application/x-zip-compressed
Size: 106173 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200728/0a1a2f35/attachment-0003.bin>