[TRNSYS-users] Ambient temp in type 94a

[Amir Hossein Rahmanzadeh]

Hi

?Im relatively new to trnsy.

I am trying to simulate the pv system but in the elementary steps I faced a problem.

I'm getting weather data from Type109 and after an equation I pass it to type 94a in kelvin, but I get the error that the ambient temp is extremely low (below 50k), but when I plot the equation output its in kelvin and logically above 50 ( I mean its definitely in kelvin not centigrade) !


The screenshots of the problem and plot is attached.


Thank all of you in advance.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200125/ab6eaedd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot (153).png
Type: image/png
Size: 114852 bytes
Desc: Screenshot (153).png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200125/ab6eaedd/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot (152).png
Type: image/png
Size: 271082 bytes
Desc: Screenshot (152).png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200125/ab6eaedd/attachment-0003.png>