[TRNSYS-users] about results for printer

[Emre Arpaci]

Okey
 jeff I found it

 thanks
Regards
Emre

Jeff Thornton via TRNSYS-users <trnsys-users at lists.onebuilding.org>, 7 Oca
2020 Sal, 21:45 tarihinde şunu yazdı:

> Emre,
>
> There are quite a few models to get the results from your simulation as
> output - with most of them contained in the OUTPUT folder.  Check out the
> Type 25 printer and the Type 46 Printegrator.
>
>
>
> Jeff
>
>
>
> ---
> Jeff Thornton
> President - TESS LLC
> 3 N. Pinckney Street, Suite 202, Madison WI USA 53703
> Office: (608) 274-2577  Fax: (608) 278-1475www.tess-inc.com
> E-Mail: thornton at tess-inc.com
>
> On 01/07/2020 12:25 pm, Emre Arpaci via TRNSYS-users wrote:
>
> Hi TRNSYS Users
> I want to import  my hourly cooling loads import to printer. in this way i
> will create a graph with excell. I dont want to use the trnsys plotter(type
> 65d) for showing the my hourly cooling  .
> İt is important  i'm waiting answers
> thanks
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200107/9a319d6d/attachment.html>