[TRNSYS-users] I CANT IMPORT AN IDF FILE

[David BRADLEY]

Ricardo,

   Once you have created the *.idf file, open TRNBuild and select 
"import TRNSYS3D file." That will take the *.idf file and turn it into a 
*.b17 file.

kind regards,

  David


On 08/15/2020 09:34, Ricardo Gallegos via TRNSYS-users wrote:
> Hello evertbody.
> I create an idf file using Trnsys3d, then I go to the Simulation 
> Studio (TRNSYS 17) and choose to create a new building project using 
> this file, but  TRNBUILD  shows this error :
> No OUTPUT's specified.
>
> And I cant go on further.
>
> The Simulation Studio shows the message:
> Cannot open BUI file for building description needed by this component 
> (given in External Diles tab)
> Please open a BUI file or cancel (to attach this file later.
>
> Whay am I doing wrong? Can you help?
> Rergards
> Ricardo
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200815/4157f71f/attachment.html>