[TRNSYS-users] Question fan coils and heat pump and pumps

[Emre Arpaci]

hi trnsys user.
ı am heating a greenhouse (100m2 glass) with water source heat pump that
connected a fan coil.
1)I m using type 600. To be honest, I dont know what is the right rated air
flowrate  and rated fan power values in the fan coil for my greenhouse.How
can I determine the suitable values for my project ?

2)I calculated my peak heating loads in the grennhouse and selected a
suitable heat pump on the market.now ı wanna creating to a my selected heap
pump catalogue data for trnsys.but not sure how to do that properly.

3) as you see in the figure ı used many pumps(for solar storage,lake pumps
etc) I thınk ı should calculate rated pump power and entered the
trnsys.Previously I thought trnsys calculated it byself.Now how can I
calculate  the  right rated pumps powers for in the figure (lake pump,solar
pump, fan coil pump) should ı use this formula P=Q*H*g*density.    ?

*thanks for your patience.*
Regards
Emre
[image: heatpmp1.jpg]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190907/c97fd702/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: heatpmp1.jpg
Type: image/jpeg
Size: 267350 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190907/c97fd702/attachment-0001.jpg>