<div dir="ltr">hi trnsys user.<br>ı am heating a greenhouse (100m2 glass) with water source heat pump that connected a fan coil.<br>1)I m using type 600. To be honest, I dont know what is the right rated air flowrate  and rated fan power values in the fan coil for my greenhouse.How can I determine the suitable values for my project ? <br><br>2)I calculated my peak heating loads in the grennhouse and selected a suitable heat pump on the market.now ı wanna creating to a my selected heap pump catalogue data for trnsys.but not sure how to do that properly.<br><br>3) as you see in the figure ı used many pumps(for solar storage,lake pumps etc) I thınk ı should calculate rated pump power and entered the trnsys.Previously I thought trnsys calculated it byself.Now how can I calculate  the  right rated pumps powers for in the figure (lake pump,solar pump, fan coil pump) should ı use this formula P=Q*H*g*density.    ?<br><div><br></div><div><b>thanks for your patience.</b><br></div><div><div>Regards </div><div>Emre</div></div><div><img src="cid:ii_k09gzn220" alt="heatpmp1.jpg" width="452" height="283"><br></div></div>