[TRNSYS-users] Not Well Loaded for But File On Type 56

[David BRADLEY]

Jing,

  You may need to open the *.bui file with your copy of TRNBuild and 
then resave it; this will force the recreation of the *.trn, *.bld, and 
*.inf files with your version of TRNBuild.

  If that does not solve the problem then I would recommend putting the 
*.bui file somewhere in the ..\TrnsysXX\ directory structure and also 
that you make sure that Trnsys is not installed in the \Program Files\ 
directory. Both the \Program Files\ directory and the ..\Desktop\ 
directory (where the error message suggests the *.bld file is located) 
can have significant restrictions on whether files can be written in 
those locations. It may be that TRNBuild is not able to write the *.bld 
file when it is in the .\Desktop directory.

kind regards,

  David


On 10/26/2019 19:44, 052312quph via TRNSYS-users wrote:
> Dear trnsys user
> After I run the simulation，it reported the error as shown on the 
> attached picture. The case is The bui file was created in other 
> version before by someone else and I use it to load to type 56 on my 
> project. I got this problem after that.
> Jing
>
> 发自我的iPhone
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191028/952fe9d1/attachment.htm>