[TRNSYS-users] How to edit the source code of the existing Component in TRNSYS 18 using typestudio

[Aditi Garg]

Thank you, I'll check it out.

On Thu, 3 Oct 2019, 23:43 Angel Carrera, <angel.carrera at aiguasol.coop>
wrote:

> Hi,
>
> check in the simulation list file to see from what .dll trnsys is loading
> type 74 . At .lst you will have messages like "The following types where
> loaded from xxx.dll". The name of the .dll that contains your modified type
> appears up right at typestudio after compiling; that is the .dll you want
> to be loadedwhen simulating
> Not sure how you proceeded so I might be pointing wrong but it is
> advisible, when you modify a type, to change the number (and make sure that
> you don't use an already existing type number). Regards
>
> Angel
>
>
> El jue., 3 oct. 2019 17:40, Aditi Garg via TRNSYS-users <
> trnsys-users at lists.onebuilding.org> escribió:
>
>> Hi
>>
>> I am making changes to type 74, making some changes in the formulas.
>>
>> On Thu, 3 Oct 2019, 19:34 John Dyreby via TRNSYS-users, <
>> trnsys-users at lists.onebuilding.org> wrote:
>>
>>> Hello Aditi,
>>>
>>> What Type (component) are you making changes to?
>>>
>>> Thanks,
>>> John
>>>
>>>
>>>
>>> On Thu, Oct 3, 2019 at 5:14 AM, Aditi Garg via TRNSYS-users <
>>> trnsys-users at lists.onebuilding.org> wrote:
>>>
>>> Dear all
>>>
>>> I want to make some changes in the formulas mentioned in the source code
>>> of a component. I am opening the code using type studio application
>>> available in TRNSYS18. After editing, I use the option `compile workspace'.
>>>
>>> The changes made can be seen in the code in the component in the
>>> simulation studio, but in the results, there is no change
>>>
>>> I would like to know if there are some more steps do I have to do while
>>> editing and compiling the code.
>>>
>>> Regards
>>> Aditi
>>>
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at lists.onebuilding.org
>>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191004/73592082/attachment.htm>