[TRNSYS-users] How to edit the source code of the existing Component in TRNSYS 18 using typestudio

Angel Carrera angel.carrera at aiguasol.coop
Thu Oct 3 11:12:50 PDT 2019


Hi,

check in the simulation list file to see from what .dll trnsys is loading
type 74 . At .lst you will have messages like "The following types where
loaded from xxx.dll". The name of the .dll that contains your modified type
appears up right at typestudio after compiling; that is the .dll you want
to be loadedwhen simulating
Not sure how you proceeded so I might be pointing wrong but it is
advisible, when you modify a type, to change the number (and make sure that
you don't use an already existing type number). Regards

Angel


El jue., 3 oct. 2019 17:40, Aditi Garg via TRNSYS-users <
trnsys-users at lists.onebuilding.org> escribió:

> Hi
>
> I am making changes to type 74, making some changes in the formulas.
>
> On Thu, 3 Oct 2019, 19:34 John Dyreby via TRNSYS-users, <
> trnsys-users at lists.onebuilding.org> wrote:
>
>> Hello Aditi,
>>
>> What Type (component) are you making changes to?
>>
>> Thanks,
>> John
>>
>>
>>
>> On Thu, Oct 3, 2019 at 5:14 AM, Aditi Garg via TRNSYS-users <
>> trnsys-users at lists.onebuilding.org> wrote:
>>
>> Dear all
>>
>> I want to make some changes in the formulas mentioned in the source code
>> of a component. I am opening the code using type studio application
>> available in TRNSYS18. After editing, I use the option `compile workspace'.
>>
>> The changes made can be seen in the code in the component in the
>> simulation studio, but in the results, there is no change
>>
>> I would like to know if there are some more steps do I have to do while
>> editing and compiling the code.
>>
>> Regards
>> Aditi
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191003/d1398544/attachment.htm>


More information about the TRNSYS-users mailing list