[TRNSYS-users] How we can add Nano material in solar loop in TRNSYSY

[Tri Ayodha]

Hi Sajid,

CMIIW:

I think enough or not enough depends on your nano fluid on the model. As
far as I know nano fluid can increase the value of thermal conductivity.
However you can check in the documentation of TRNSYS especially in
mathematical reference the solar thermal collector component. There is no
consideration about thermal conductivity. So I think you need to make your
solar thermal collector component which is suitable for your needs.

Regards,

Tri Ayodha Ajiwiguna

On Wed, May 29, 2019 at 9:51 PM MEHMOOD Sajid via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Dear All,
>
> I have one question and respond to this email if you know some thing about
> it.
>
> How we can add nano-materials properties in solar collector loop
> (pump-collector-tank) using TRNSYS software. if we only change specific
> heat of fluid with CP of nano materials or any other fluid. Is this single
> parameter enough????
>
> Thank you.
>
> Best Regards,
> Sajid
>
> The University of Edinburgh is a charitable body, registered in Scotland,
> with registration number SC005336.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190529/8b528293/attachment.htm>