[TRNSYS-users] TRNSYS crashes with no error message, but a lot of warnings refering to the PSYCHROMETRICS routine
David BRADLEY
d.bradley at tess-inc.com
Mon May 13 07:08:09 PDT 2019
Knut Erik,
Can you please send me the project and any files needed in order to
run it? This sounds like something that will take a Fortran
compiler/debugger to resolve.
best,
David
On 05/13/2019 06:22, Knut Erik Enerstvedt wrote:
> David and C K Le,
>
> Thanks for your advice regarding my problem. I have now managed to
> trace the error to a specific component or group of components, and
> the simulation runs without crashing when I turn them off. I still
> have to find what is wrong with those components, but it's easier when
> you know where to look.
>
> Best regards
> Knut Erik Enerstvedt
> Gether AS
>
> fre. 3. mai 2019 kl. 02:27 skrev C K Lee <a8304506 at graduate.hku.hk
> <mailto:a8304506 at graduate.hku.hk>>:
>
> Dear Knut.
>
> My experience is that the most possible causes of so many warnings
> are
> due to inappropriate fluid mass flowrates and/or insufficient thermal
> capacitances in the fluid streams. You may trace the problems in
> these
> directions.
>
> Best Regards
> C K Lee
> Research Fellow
> City University of Hong Kong
>
>
> On 2019-05-02 21:59, David BRADLEY via TRNSYS-users wrote:
> > Knut,
> >
> > In migrating to 64-bit architecture we have run into some
> situations
> > where the 32-bit version managed to get through an iteration
> while the
> > 64-bit version doesn't. Can you please send me the project and
> all the
> > files needed in order to run it so that I can have a look where
> it is
> > getting hung up?
> >
> > thank you,
> >
> > David
> >
> > On 05/02/2019 04:38, Knut Erik Enerstvedt via TRNSYS-users wrote:
> >
> >> Hello,
> >>
> >> When running a simulation, TRNEXE crashes after a while without
> >> displaying any error message. Usually it pops up a box saying there
> >> is an error, but now it just freezes with a "Program not
> responding"
> >> message in the top of the window. When I close the program, the log
> >> file window appears. It shows no errors, but a lot of warnings
> >> saying that "The referenced UNIT has called the PSYCHROMETRICS
> >> routine with conditions outside the intended range of the dew point
> >> temperature correlation. The correlation from the 1981 ASHRAE
> >> fundamentals handbook is for the temperature range of -60 C to 70
> >> C." These warnings refer to units of Type 670 and 995 (TESS heating
> >> and cooling coil). I have tried to increase the setting "number of
> >> warnings before error" as a work around, since I can't understand
> >> why these warnings appear. I also do not know if these warnings are
> >> the reason why TRNEXE crashes, since there is no error message
> >> saying that they are, but I have no other clues.
> >>
> >> I would appreciate if anyone has an idea why this happens. My
> TRNSYS
> >> version is 18.01.0000.
> >>
> >> Best regards
> >>
> >> Knut Erik Enerstvedt
> >>
> >> Gether AS
> >>
> >> _______________________________________________
> >> TRNSYS-users mailing list
> >> TRNSYS-users at lists.onebuilding.org
> <mailto:TRNSYS-users at lists.onebuilding.org>
> >>
> >
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> >> [1]
> >
> > --
> > ***************************
> > David BRADLEY
> > Principal
> > Thermal Energy Systems Specialists, LLC
> > 3 North Pinckney Street - suite 202
> > Madison, WI 53703 USA
> >
> > P:+1.608.274.2577
> > F:+1.608.278.1475
> > d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
> >
> > http://www.tess-inc.com [2]
> > http://www.trnsys.com [3]
> >
> >
> > Links:
> > ------
> > [1]
> >
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> > [2] http://www.tess-inc.com
> > [3] http://www.trnsys.com
> >
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> <mailto:TRNSYS-users at lists.onebuilding.org>
> >
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190513/d6fd656b/attachment.htm>
More information about the TRNSYS-users
mailing list