[TRNSYS-users] help : tilted glazing facing earth

[MOUJALLED Bassam - CEREMA/DTerCE/DCAP/UPERBAT]

Hello,

I would like to model a tilted glazing with a slope of 120° (facing 
earth) using type56. When I run the simulation I get an error indicating 
that the slope of the glazing must be between 0 and 90 °.

I would like to know if it is possible to model with the type56 a tilted 
glazing facing earth? And if not, are there other ways to model it in 
TRNSYS?

Thanks in advance for your help,

Best regards,

-- 
*Bassam MOUJALLED
**Chargé de recherche en performance énergie/usage du bâtiment *

*Cerema Centre-Est*
**Département Construction Aménagement Projet (DCAP)
**46, rue St Théobald - BP 128 - 38081 L'Isle d'Abeau Cedex*
*

*Tél: +33 (0)4 74 27 51 55
E-mail : bassam.moujalled at cerema.fr

***

**



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190528/776a21c6/attachment.html>