[TRNSYS-users] multi dimensional data interpolation

[Sekaina EL KHATTABI]

Hi everyone,

I want to do a 4 dimensional data interpolation using type 581a but it
gives me these errors :
"an illegal number of inputs has been specified for this component. please
chech the component configuration. 5 inputs are required and 6 were
specified"
but I changed nothing in the inputs
[image: image.png]

the same thing for parameters. the errors is "7 parameters are required and
11 were specified"
[image: image.png]
also, i cannot understand the difference between 'number of values of nth
indenpendent variable' end 'number of values of independent variable-n'

have you any idea why there are 6 imputs and 11 parameters by default ?

Best regards


-- 
*Sekaina EL KHATTABI*
Élève Ingénieur à l'Ecole Centrale de Nantes
+212 6 02 24 71 01
+33 6 60 18 15 70
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190507/dfe3fcac/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 19509 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190507/dfe3fcac/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 24138 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190507/dfe3fcac/attachment-0003.png>