[TRNSYS-users] TRNSYS 3D (Zone convex)

[Marion Hiller]

Dear SRHAYRI,

In Trnsys thermal zones have to be convex if the 3d detailed radiation modes are applied.
Since 3d detailed radiation modes have been introduced with the release of Trnsys 17, it doesn’t apply for Trnsys 16.

Marion


Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> Im Auftrag von Imane Srhayri via TRNSYS-users
Gesendet: Samstag, 23. März 2019 14:08
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Imane Srhayri <imane.frr at gmail.com>
Betreff: [TRNSYS-users] TRNSYS 3D (Zone convex)

Hello everybody

I found in the documentation of TRNSYS 18 that the zones must be CONVEXE as shown in the picture below

I want to know please if this condition is also applied in TRNSYS 16 or not.

Many thanks
[image.png]


--
SRHAYRI Imane Ph.D Student
Research Team of Thermal, Energy and Environment
ENSET, Mohammed V University of Rabat

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190325/6ba08d7c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 74187 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190325/6ba08d7c/attachment-0002.png>