[TRNSYS-users] TRNSYS 3D (Zone convex)

[Imane Srhayri]

Hello everybody

I found in the documentation of TRNSYS 18 that the zones must be CONVEXE as
shown in the picture below

I want to know please if this condition is also applied in TRNSYS 16 or
not.

Many thanks
[image: image.png]


-- 
*SRHAYRI Imane Ph.D Student *
*Research Team of Thermal, Energy and Environment*
*ENSET, Mohammed V University of Rabat *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190323/eea41073/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 181594 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190323/eea41073/attachment-0001.png>