[TRNSYS-users] temperature of glazing

[David BRADLEY]

Alex,

  I would think that you could go into the TRNBuild output manager and 
select the inside surface temperature of the glazing in question.

kind regards,

  David



On 03/21/2019 18:29, Alex moreno via TRNSYS-users wrote:
> Hi is posibe know the temperature of interior glazing of a window with 
> two glass. Manual of trnsys says : For each glazing of the window, the 
> resulting temperature is calculated considering transmission, 
> absorption and reflection of incoming direct and diffuse solar 
> radiation, diffuse short-wave radiation being reflected from the walls 
> of the airnode.
>
> Regards
>
> Alex Moreno Bellostes
> Phd University of Lleida
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190322/89080f50/attachment.htm>