[TRNSYS-users] Question

[Sam Elyas]

I used an equation outside type56 with occupancy and season as an input 
to the equation*.

Le 24/06/2019 à 13:40, Sam Elyas a écrit :
>
> Hi Aya,
>
> I had to deal with the same issue recently, I used an input and set 
> the setpoints in order to not have cooling when there is no occupancy. 
> to achieve that I "26*Occypancy*SeasonC+100*(1-Occupancy*SeasonC)" 
> where seasonC is the cooling season, Occupancy is an input from type14 
> (and 41a) schedule.
>
> Hope that helps.
>
> Regards,
>
> Le 24/06/2019 à 09:20, aya khalil via TRNSYS-users a écrit :
>>
>> Dear ,
>> /I trying to calculate the cooling demand of my office // building in 
>> TRNBUILD and would like the cooling demand to //response according to 
>> my occupancy schedule(less cooling at //night and more cooling at 
>> day). I try to define the set temp // at the cooling type by i not 
>> sure which one should i use /(/schedule or input?) And also the 
>> equation behind it,// because when i enter like for instance 
>> _25degree(set temp) //*occupancy schedule+0_, i would get 0 degree 
>> when there is // no occupancy. // Appreciate your kind assistance on 
>> this Email /
>> /Aya khalil /
>> /Master student at usj-beirut /
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190624/42ef5510/attachment.htm>