[TRNSYS-users] Facing error in trnsys Simulation

[MEHMOOD Sajid]

Hi All,

I modelled a simple absorption cooling system for multizone building. when i run simulation i face this error.

"Floating point division by zero" please see attached figure(s).

I play with tolerance and minimum and maximum relaxation factor in settings but got nothing.
I am running this simulation with time step of 1 minute.

Can anyone please comment on this to solve this error.

Thanks in advance.

Best Regards,
Virk
The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190718/3078eeaa/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: floating point error.JPG
Type: image/jpeg
Size: 98966 bytes
Desc: floating point error.JPG
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190718/3078eeaa/attachment-0003.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: unexpected error.JPG
Type: image/jpeg
Size: 101743 bytes
Desc: unexpected error.JPG
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190718/3078eeaa/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: errors page.JPG
Type: image/jpeg
Size: 41880 bytes
Desc: errors page.JPG
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190718/3078eeaa/attachment-0005.jpe>