[TRNSYS-users] greenhouse desing

[Emre Arpaci]

i want to thanks to all guys. your messages is very helpful.
kind regards

David BRADLEY <d.bradley at tess-inc.com>, 8 Tem 2019 Pzt, 17:29 tarihinde
şunu yazdı:

> Emre,
>
>  In addition to Mario's comment, you might also look at your assumptions
> for the amount of infiltration in your greenhouse and the ground
> temperature underneath your greenhouse. Depending on how you created the
> Studio project (either using the import wizard or manually) you may not be
> accounting for any infiltration. Greenhouses typically have fairly high
> infiltration rates.
>
> kind regards,
>
>  David
>
>
> On 07/06/2019 07:43, Emre Arpaci via TRNSYS-users wrote:
>
> hi to everyone.
> i have trnsys 17 and i want to desing a basic closed greenhouse with
> trnsys.
>
>  i sketched my greenhouse with google skecth up. I made all walls and
> roofs in the form of glass.(because
> I want to make every wall of the greenhouse that made of glass  )
> And I import my idf file to trnsys.  And that is all i didnt add any
> ventilation.And a day in january of max temperature 7.5 degrees ,the
> greenhouse max. temperature is  going to 38 celcius degree. is that normal
> ? why this is so high ?
>
> where am I doing wrong and what else should I add to the greenhouse.
>
> Actually i m new with trnsys. and I read some article about greenhouse
> some people are adding wind speed to greenhouse etc. İs there anyone to
> explain clearly how to desing greenhouse with trnys.
>
> All messages are important to me .
> Thanks
> kind regards
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190708/a4a0c4e3/attachment.html>