[TRNSYS-users] Type531->534 illegal param value error

[Jeff Thornton]

Olivier,

Did you use the plug-in to generate the data file or try to do it by hand?  The plug-in does all of the file formatting for you and is highly recommended!

Jeff - TESS

Sent from my iPhone

> On Feb 14, 2019, at 3:35 AM, Le Talave via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello,
> 
> I'm trying to use the Tess lib Flat bottom Tank type 531. As specified in the documentation, I write all the parameters needed in the data file, but tnrsys returns a message 103, with an illegal parameter. The reference of this parameter is variable for the same simulation, so it seems that i can't use it to find the error. "Parameter 9" error often comes back. I tried many configurations, with no ports, no hx, no auxiliary, I carefully cycled the concerned parameters by repeating them in the file, but the problem is the same.
> 
> Is there a special syntax to use in the dat file? When the documentation says "no further parameter is needed", should I continue with the next used parameter or do I have to write something in the dat file before go the the next one? Is it possible to annotate the dat file (write a text that type531 doesn't "see"), so that I can give a name to each parameter and make faster modifications?
> 
> Thanks a lot for your help
> 
> Kind regards,
> 
> Olivier
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190214/c06749fa/attachment.htm>