[TRNSYS-users] Dome Problem

[Mario González]

Michele,

I think that your problem is the geometry. To simulate a building in
TRNSYS, you have to modelate flat surfaces.

Regards,
Mario.


>
> ---------- Forwarded message ----------
> From: Michele Vella <michele.vella.15 at um.edu.mt>
> To: trnsys-users at lists.onebuilding.org
> Cc:
> Bcc:
> Date: Wed, 27 Feb 2019 18:00:42 +0100
> Subject: [TRNSYS-users] Dome Problem
> [image: image.png]
> Im trying to draw up a church with domes and when opening the idfs it is
> showing as shown above. Also importing into the trnsys sim template the
> following deck error is showing:
>
> Warning: A link or connection has not been created between the component
> Weather data-2 and the component Radiation!
> The component Weather data-2 have not enough output (less than 136)!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190227/73584960/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 122821 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190227/73584960/attachment-0001.png>