[TRNSYS-users] Pump option for fluid circulation

[Arian Bahrami]

Hi,
Is it possible to simulate a closed circuit without having pump to circulate a fluid in the circuit using some valve options instead (For instance, setting mass flow rate as the input or parameter of some kind of valves) ? Please have a look at these two Figures to see whether the system on the right hand side is working practically or not. Thank you so much for your attention.

Arian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190213/61e98b32/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Untitled.png
Type: image/png
Size: 128307 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190213/61e98b32/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Untitled_1.png
Type: image/png
Size: 182491 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190213/61e98b32/attachment-0003.png>