[TRNSYS-users] The east and west side of my building are close to other buildings. How can I simulate that in trnbuild?

[David BRADLEY]

Salma,

   The method you'd use depends a bit on what you care about. If the 
nearby buildings provide shading to your building but do not have any 
other significant impact then I would set up a shading object in 
Trnsys3d. If the buildings are close enough that the temperature of 
rooms in those buildings impacts the temperature in your building then I 
would suggest using the TRNBuild/Type56 concept of a BOUNDARY wall for 
those facades.

kind regards,

  David


On 12/09/2019 06:26, SALMA LAHMAR via TRNSYS-users wrote:
>   Hello all,
> The east and west side of my building are close to other buildings. 
> How can I simulate that in trnbuild?
> thanks in
> ᐧ
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191210/6666a33e/attachment.html>