[TRNSYS-users] TRNSYS-EES coupling error

[David BRADLEY]

Hoofar,

   Unfortunately I think the problem may have to do with EES being 
located in the C:\Program Files (x86)\ directory. I am a bit surprised 
that spaces in the pathname are giving you trouble, you /should /be able 
to type the path enclosed in double quotes and have it resolve 
correctly. I will certainly have a look and make sure that we don't have 
a problem there. Can you send me the TRNSYS project and EES file that 
you are working with? I can see if it is possible to recreate the 
problem here.


   However, spaces in path names aside, Windows is /very /restrictive 
about allowing software to create or modify files in the \Program Files\ 
directory. Even if the user account has administrative rights, the 
software itself may not and Windows will block the communication. I 
realize in your email you said that you cannot move EES out of the 
\Program Files (x86)\ so I realize this response may be of limited use.


regards,

  David



On 04/02/2019 15:03, Hemmatabady, Hoofar wrote:
>
> Hi David,
>
>
> No, I could not find a solution yet.
>
>
> Best regards,
>
> Hoofar
>
>
> ------------------------------------------------------------------------
> *Von:* TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im 
> Auftrag von David BRADLEY via TRNSYS-users 
> <trnsys-users at lists.onebuilding.org>
> *Gesendet:* Montag, 1. April 2019 19:04:48
> *An:* Hemmatabady, Hoofar via TRNSYS-users
> *Cc:* David BRADLEY
> *Betreff:* Re: [TRNSYS-users] TRNSYS-EES coupling error
>
> Hoofar,
>
>   Did you find a solution to this problem? I am just back from a week 
> out of town and I don't see a response.
>
> regards,
>
>  David
>
>
> On 03/22/2019 04:48, Hemmatabady, Hoofar via TRNSYS-users wrote:
>>
>> Dear TRNSYS users,
>>
>> I am coupling TRNSYS with EES. EES is installed in (C:\Program Files 
>> (x86) \EES32). After I changed the location of EES in type 66a, got 
>> the following error:
>>
>> /"TRNSYS Message 48 : The TRNSYS processor has reported that an 
>> />/unrecognized control card was found while trying to read the input 
>> />/file. This error can be caused by underspecifying a required 
>> number of / >/items in the input file. For example, specifying only 9 
>> parameters />/after a "PARAMETERS 10" card has been read can cause 
>> this error. The />/line that caused this error is listed in the 
>> reported information />/below. //Reported information: compressor.ees/
>>
>> //
>>
>> When I run the same example in another computer, which has EES 
>> installed in (C:\EES32), it works. I found that labels with spaces 
>> are not allowed in TRNSYS ((_Program Files (x86)_ is read by TRNSYS 
>> as _Program files_ because of the space between _Program files and 
>> (x86)_!!). As I cannot change the location of EES in my main server, 
>> I tried to solve the problem by adding double-quote “C:\Program Files 
>> (x86) \EES32”or single-quote ‘C:\Program Files (x86) \EES32’ but I 
>> got the following error again:
>>
>> /The EES program was not found at the specified location//. /
>>
>> //
>>
>> How can I solve this problem?
>>
>> Best regards,
>>
>> Hoofar
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190403/b77d45e1/attachment-0001.html>