[TRNSYS-users] TRNSYS simulation problem consultation

[LIU, jiajia [Student]]

Dear researchers,


I have met a problem with TRNSYS simulation showing that "Unrecognized variable name or bad data card. TRNSYS was looking for a numerical value or the name of a variable defined in an equation/constant and instead it found the data of PK...".


Actually, I did not find any information on PK... in my model. Could you please help.


The detailed error information is shown in the figure below:


[cid:f8197048-25f2-4688-b761-cad4df89fc4e]


Hope you can help me.


Best Regards,

Jasmine.

[http://mlm.polyu.edu.hk/PolyU_Email_Signature.jpg]

Disclaimer:

This message (including any attachments) contains confidential information intended for a specific individual and purpose. If you are not the intended recipient, you should delete this message and notify the sender and The Hong Kong Polytechnic University (the University) immediately. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited and may be unlawful.

The University specifically denies any responsibility for the accuracy or quality of information obtained through University E-mail Facilities. Any views and opinions expressed are only those of the author(s) and do not necessarily represent those of the University and the University accepts no liability whatsoever for any losses or damages incurred or caused to any party as a result of the use of such information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190402/28a6ba83/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 14392 bytes
Desc: pastedImage.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190402/28a6ba83/attachment-0001.png>