[TRNSYS-users] suspended floor

[David BRADLEY]

How you do this depends on which version of Trnsys you are using. If you 
are using Trnsys17 or 18 then you can draw the floor and the conditioned 
part of the building that is above it in SketchUp/Trnsys3d and the floor 
will be imported as EXT_FLOOR with ambient temperature on the back side 
and no incident solar radiation. If you are using Trnsys16 then you'd 
define the floor in TRNBuild as EXTERNAL and you'd give it an 
orientation that has no solar radiation incident on it.

kind regards,

  David



On 09/06/2018 04:04, up201700037 via TRNSYS-users wrote:
> Dear users,
>
> I want to define a suspended external floor in contact to the ambient 
> temperature in trnsys. Please help me what to do.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com