[TRNSYS-users] Rendering settings - TRNSYS3D

Sat Oct 6 02:28:29 PDT 2018

Dears,
Dear Cristoph,

I testing this way (Profil temperature animation) just on one zone.

I give you all files generated by the software.

Thank you very much

Le ven. 5 oct. 2018 11:41, BENFEDDOULNanouar Anouar <
benfeddoulanouar at gmail.com> a écrit :

> Dears,
> Dear Christoph,
>
> Thank you for the information.
>
> I chose just the Temp_Zone like the only parameter of simulation, in order
> to not confuse with another parameters.
>
> The problem is the same, when i want to load data variables in google
> sketch up, the temperature values didn't load .
>
> In simulation studio, i add the type 125, and i *link just temperature *as
> the *output parameter*. I don't know if i should add anything in
> simulation studio *in order to load temprerature information in google
> sketch up.*
>
> Thank you very much
>
> Le jeu. 4 oct. 2018 à 16:55, <trnsys-users-request at lists.onebuilding.org>
> a écrit :
>
>> Send TRNSYS-users mailing list submissions to
>>         trnsys-users at lists.onebuilding.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>> or, via email, send a message with subject or body 'help' to
>>         trnsys-users-request at lists.onebuilding.org
>>
>> You can reach the person managing the list at
>>         trnsys-users-owner at lists.onebuilding.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>> Today's Topics:
>>
>>    1. Type 112b Motor Efficiency (Emir Gyuner Ahmed)
>>    2.  Loading temperature data in Google Sketch Up
>>       (BENFEDDOULNanouar Anouar)
>>    3. Re: Loading temperature data in Google Sketch Up (hotline)
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Emir Gyuner Ahmed <EmirGyuner.Ahmed at arup.com>
>> To: "trnsys-users at lists.onebuilding.org" <
>> trnsys-users at lists.onebuilding.org>
>> Cc:
>> Bcc:
>> Date: Thu, 4 Oct 2018 07:56:59 +0000
>> Subject: [TRNSYS-users] Type 112b Motor Efficiency
>>
>> Dear Trnsys Users,
>>
>>
>>
>> I am modelling an AHU system in Trnsys for a part of my Master Thesis. I
>> use Type 112b to model a fan and I just discovered that the motor
>> efficiency parameter input of the fan has no impact on the power
>> consumption but it is only used in the equation to calculate heat losses to
>> the air from the pump.
>>
>>
>>
>> But this value works backwards in the equation in my opinion. The outlet
>> air temperature rises with a greater efficiency value, which means more
>> heat transfer from the fan motor to the air stream is bigger with a more
>> efficient motor!? . Should not it be the other way around?
>>
>> Another point is, when the motor heat loss fraction is 1, changing the
>> efficiency of the motor does not make any difference at the outlet air
>> temperature.
>>
>> If anybody has any experience with this type, a help would be much
>> appreciated.
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Emir
>>
>>
>>
>> ____________________________________________________________
>> Electronic mail messages entering and leaving Arup business
>> systems are scanned for viruses and acceptability of content
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: BENFEDDOULNanouar Anouar <benfeddoulanouar at gmail.com>
>> To: trnsys-users at lists.onebuilding.org
>> Cc:
>> Bcc:
>> Date: Thu, 4 Oct 2018 11:36:36 +0100
>> Subject: [TRNSYS-users]  Loading temperature data in Google Sketch Up
>> Dears,
>>
>> Could anyone can tell me why temperature data of TRNSYS can't be load in *Rendering
>> Settings in Google Sketch Up:*
>>
>> The problem is that i can load the data source from the .eso file
>> generate by Type 125. But when i want load the *data variable* and i
>> select *zone*, the outside and inside variable can't be load
>> automatically.
>>
>> Therefore, i can't animate de temperature profil in Google Sketch Up
>>
>> Any help will be appreciated!
>>
>> Thank you very much
>>
>> --
>> *BENFEDDOUL Anouar*
>> *Energy Efficiency Trainer At IFMEREE Oujda*
>> *06 66 03 98 85*
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: hotline <hotline at transsolar.com>
>> To: "TRNSYS users mailing list at OneBuilding.org" <
>> trnsys-users at lists.onebuilding.org>
>> Cc:
>> Bcc:
>> Date: Thu, 4 Oct 2018 13:59:55 +0000
>> Subject: Re: [TRNSYS-users] Loading temperature data in Google Sketch Up
>>
>> Hey,
>>
>>
>>
>> When loading the data variables, make sure you choose the corresponding
>> variable type in simulation studio. Don’t mix surfaces and zones or
>> different outputs as temperature with rel. humidity.
>>
>> Hope that works!
>>
>> For more information please read the 04-MathematicalReference, 4.7.6.
>> Type 125: Trnsys3D Result Visualizer for SketchUp™.
>>
>>
>>
>> Best,
>>
>> Christoph
>>
>>
>>
>> *Von:* TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> *Im
>> Auftrag von *BENFEDDOULNanouar Anouar via TRNSYS-users
>> *Gesendet:* Donnerstag, 4. Oktober 2018 12:37
>> *An:* trnsys-users at lists.onebuilding.org
>> *Cc:* BENFEDDOULNanouar Anouar <benfeddoulanouar at gmail.com>
>> *Betreff:* [TRNSYS-users] Loading temperature data in Google Sketch Up
>>
>>
>>
>> Dears,
>>
>>
>>
>> Could anyone can tell me why temperature data of TRNSYS can't be load in *Rendering
>> Settings in Google Sketch Up:*
>>
>>
>>
>> The problem is that i can load the data source from the .eso file
>> generate by Type 125. But when i want load the *data variable* and i
>> select *zone*, the outside and inside variable can't be load
>> automatically.
>>
>>
>>
>> Therefore, i can't animate de temperature profil in Google Sketch Up
>>
>>
>>
>> Any help will be appreciated!
>>
>>
>>
>> Thank you very much
>>
>>
>>
>> --
>>
>> *BENFEDDOUL Anouar*
>>
>> *Energy Efficiency Trainer At IFMEREE Oujda*
>>
>> *06 66 03 98 85*
>>
>> [image: Das Bild wurde vom Absender entfernt.]
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>
>
> --
> *BENFEDDOUL Anouar*
> *Energy Efficiency Trainer At IFMEREE Oujda*
> *06 66 03 98 85*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181006/b0bb59b8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 669 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181006/b0bb59b8/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OneZone.rar
Type: application/rar
Size: 289286 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181006/b0bb59b8/attachment-0002.rar>