[TRNSYS-users] Rendering settings - TRNSYS3D

Fri Oct 5 03:41:28 PDT 2018

Dears,
Dear Christoph,

Thank you for the information.

I chose just the Temp_Zone like the only parameter of simulation, in order
to not confuse with another parameters.

The problem is the same, when i want to load data variables in google
sketch up, the temperature values didn't load .

In simulation studio, i add the type 125, and i *link just temperature *as
the *output parameter*. I don't know if i should add anything in simulation
studio *in order to load temprerature information in google sketch up.*

Thank you very much

Le jeu. 4 oct. 2018 à 16:55, <trnsys-users-request at lists.onebuilding.org> a
écrit :

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
> Today's Topics:
>
>    1. Type 112b Motor Efficiency (Emir Gyuner Ahmed)
>    2.  Loading temperature data in Google Sketch Up
>       (BENFEDDOULNanouar Anouar)
>    3. Re: Loading temperature data in Google Sketch Up (hotline)
>
>
>
> ---------- Forwarded message ----------
> From: Emir Gyuner Ahmed <EmirGyuner.Ahmed at arup.com>
> To: "trnsys-users at lists.onebuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Thu, 4 Oct 2018 07:56:59 +0000
> Subject: [TRNSYS-users] Type 112b Motor Efficiency
>
> Dear Trnsys Users,
>
>
>
> I am modelling an AHU system in Trnsys for a part of my Master Thesis. I
> use Type 112b to model a fan and I just discovered that the motor
> efficiency parameter input of the fan has no impact on the power
> consumption but it is only used in the equation to calculate heat losses to
> the air from the pump.
>
>
>
> But this value works backwards in the equation in my opinion. The outlet
> air temperature rises with a greater efficiency value, which means more
> heat transfer from the fan motor to the air stream is bigger with a more
> efficient motor!? . Should not it be the other way around?
>
> Another point is, when the motor heat loss fraction is 1, changing the
> efficiency of the motor does not make any difference at the outlet air
> temperature.
>
> If anybody has any experience with this type, a help would be much
> appreciated.
>
>
>
> Thanks in advance.
>
>
>
> Emir
>
>
>
> ____________________________________________________________
> Electronic mail messages entering and leaving Arup business
> systems are scanned for viruses and acceptability of content
>
>
>
> ---------- Forwarded message ----------
> From: BENFEDDOULNanouar Anouar <benfeddoulanouar at gmail.com>
> To: trnsys-users at lists.onebuilding.org
> Cc:
> Bcc:
> Date: Thu, 4 Oct 2018 11:36:36 +0100
> Subject: [TRNSYS-users]  Loading temperature data in Google Sketch Up
> Dears,
>
> Could anyone can tell me why temperature data of TRNSYS can't be load in *Rendering
> Settings in Google Sketch Up:*
>
> The problem is that i can load the data source from the .eso file generate
> by Type 125. But when i want load the *data variable* and i select *zone*,
> the outside and inside variable can't be load automatically.
>
> Therefore, i can't animate de temperature profil in Google Sketch Up
>
> Any help will be appreciated!
>
> Thank you very much
>
> --
> *BENFEDDOUL Anouar*
> *Energy Efficiency Trainer At IFMEREE Oujda*
> *06 66 03 98 85*
>
>
>
> ---------- Forwarded message ----------
> From: hotline <hotline at transsolar.com>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Thu, 4 Oct 2018 13:59:55 +0000
> Subject: Re: [TRNSYS-users] Loading temperature data in Google Sketch Up
>
> Hey,
>
>
>
> When loading the data variables, make sure you choose the corresponding
> variable type in simulation studio. Don’t mix surfaces and zones or
> different outputs as temperature with rel. humidity.
>
> Hope that works!
>
> For more information please read the 04-MathematicalReference, 4.7.6. Type
> 125: Trnsys3D Result Visualizer for SketchUp™.
>
>
>
> Best,
>
> Christoph
>
>
>
> *Von:* TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> *Im
> Auftrag von *BENFEDDOULNanouar Anouar via TRNSYS-users
> *Gesendet:* Donnerstag, 4. Oktober 2018 12:37
> *An:* trnsys-users at lists.onebuilding.org
> *Cc:* BENFEDDOULNanouar Anouar <benfeddoulanouar at gmail.com>
> *Betreff:* [TRNSYS-users] Loading temperature data in Google Sketch Up
>
>
>
> Dears,
>
>
>
> Could anyone can tell me why temperature data of TRNSYS can't be load in *Rendering
> Settings in Google Sketch Up:*
>
>
>
> The problem is that i can load the data source from the .eso file generate
> by Type 125. But when i want load the *data variable* and i select *zone*,
> the outside and inside variable can't be load automatically.
>
>
>
> Therefore, i can't animate de temperature profil in Google Sketch Up
>
>
>
> Any help will be appreciated!
>
>
>
> Thank you very much
>
>
>
> --
>
> *BENFEDDOUL Anouar*
>
> *Energy Efficiency Trainer At IFMEREE Oujda*
>
> *06 66 03 98 85*
>
> [image: Das Bild wurde vom Absender entfernt.]
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
*BENFEDDOUL Anouar*
*Energy Efficiency Trainer At IFMEREE Oujda*
*06 66 03 98 85*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181005/5267ce64/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 669 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181005/5267ce64/attachment.jpg>