[TRNSYS-users] NO window (No glazing Win iD-100)

adnan rasheed adnan.upm.spain at gmail.com
Mon Oct 15 23:08:24 PDT 2018

Hello all,

I am using TRNSYS 18 and i am using 3D building for detailed radiation mode
for a building and to avoid concave geometry i divided building to
different zones and adjacent windows were used.

My problem is when i assigned No- glazing in TRNBuild it gives error.
"Inconsistency of optical data standard of glazing within a zone, different
standard were used compared to the previous one, check the correct glazing
data". i read somewhere that to use no glazing the geometry mode should be
3D manual, but if i will use geometry mode manual i cant use Detail
interior and exterior radiation calculation.

Can anybody help me with that..

Adnan Rasheed
PhD Researcher
Kyungpook National University
Daegu, South Korea.
adnan.upm.spain at gmail.com, adnanrasheed at knu.ac.kr

[image: Mailtrack]
notified by
3:07:52 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181016/2ff3c389/attachment.html>

More information about the TRNSYS-users mailing list