[TRNSYS-users] New added Glazing

[adnan rasheed]

Hello all,

i had prepared my own glazing with the required properties using WINDOWS
7.4 software. my problem is that i have prepared two different building
models

1- when i apply prepared glazing in one project its works fine, but on
second building project same glazing gives following error "Inconsistency
of optical data standard of glazing within a zone, different standard were
used compared to the previous one, check the correct glazing data".

2- My second model is ok when i apply any other glazing already in TRNSYS
it works fine and simulation runs.
3- my question is if new added glazing have some problem it shouldn't work
on one model.

anybody have any idea where can be a problem..
Thanks..
-- 
Adnan Rasheed
PhD Researcher
Kyungpook National University
Daegu, South Korea.
+82-102762-0105
adnan.upm.spain at gmail.com, adnanrasheed at knu.ac.kr

[image: Mailtrack]
<https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality5&>
Sender
notified by
Mailtrack
<https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality5&>
10/16/18,
11:49:32 AM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181016/1c133fde/attachment.html>